Power Loss Hack: Showering in the Dark

A couple of weeks ago, our power went out.  I hadn't showered from the gym yet so I precariously balanced a candle on the edge of the tub and tried not to get the floor wet.



What did Tony do??  Grabbed one of our outdoor solar powered lights.  It was fully charged and they're waterproof!

Next time your power goes out, grab your lawn lights!

Garage Makeover

When we moved in, the garage was a holding place for a long time.  A couple of weeks ago, my parents came to visit and we built the workbench.  In anticipation for the project, I took an hour and moved stuff around or put it away.  There was a huge improvement.  Sweeping out the floor and cleaning up the cobwebs also helped tremendously.

After we built the workbench, we moved other stuff around and swept up.  The garage is now so neat and organized that it's one of my favorite places to be.

Thanks for stopping by!

Pincess: Fix a Broke Compact

 

I saw this pin on Pinterest and I thought I'd give it a try.  What you do is further crush up you make-up.  Then you add Isopropyl Alcohol (found at drug/grocery stores) and mix it well with you broken make-up.  You let it dry overnight and you have a fixed compact.

Here are my results!

Did it work?
Yes but the new compact is not the same as before.  It's much harder.  I have to actually scrap some make-up free to use it.  The brush alone can't get the make-up.

Would I do it again?
Yes. The remaining makeup is lasting.  Just an added step in my morning process.  I'd use this as a final option.

Have you tried this pin?  Did you get the same results?

DIY Workbench

This past weekend was filled with a quick and easy project that made all the difference in the world.  My parents came to visit and my dad helped us build a workbench.  I wanted something that had a table top, a bottom shelf, a peg backboard, and an upper shelf.  My dad had built a workbench years ago when they moved into their current house.  We were going to build something similar. 

When he built his, he used RTC2Z Rigid Tie Connectors.  We used the same ones and they made the whole thing so easy!!

We also used plans from DIY Done Right as the starting point.  We did modify them to create a 6' x 2' x 6' work bench rather than the 4' x 2' x 5' one that the plans had.  We lifted the height of the table top as well since Tony and I are taller. 

Here's what we did.

Step 1: Determine the size of the workbench and the materials required.

As I mentioned, we modified the design to give us a larger workbench.  See our new plans below.

Here's what we needed for our larger workbench:

Tools Required:

• Saw
• Screw gun
• #2 Phillips head bit
• Tape measure
• Clamps
• Framing square

Materials Required:

• 2" x 4" x 8' lumber - 6 pcs 8 pcs
• 24" x 48" - ⅝" plywood sheet 48" x 96" - 23/32" plywood sheet
• 24" x 48" 48" x 96" - ¼" pegboard sheet
• (8) Rigid Tie RTC2Z Connectors
• (1 box) Strong-Drive® SD #8 x 1¼" Screws - 100 ct
• (20) (36) #6 x 1¼" flat-head screws
• (4) #6 x 2½" flat-head screws

You can also buy a workbench kit from Amazon here or here.

Step 2: Purchase Materials.

The Rigid Tie connectors and SD Screws came from Home Depot.  I had gotten them earlier in the week.  Saturday morning we went to Lowe's and got the lumber, plywood, and pegboard.  The nice thing about Lowe's, or any of the big hardware stores is that they will rip the large sheets for you.  We had them cut the plywood and pegboard down for us.  If you have this option, take it!  The pieces are perfectly square and it saves a ton of time!  This gave us:

• (2) 2' x 6' - 23/32" plywood sheets + scrap
• (1) 3' x 6' - 1/4" pegboard sheet + scrap

Step 3: Cut to length


We had to cut our 2x4's to length.  We followed the modifications that we made in Step 1.

We needed:

• 1 - 72" piece for the top rail
• 2 - 70" pieces for the rear corner posts
• 4 - 69" pieces for the rails
• 2 - 38" pieces for the front corner posts
• 4 - 17" pieces for the end rails

Step 4: Assemble end pieces.

Make sure you make opposites ends.  You don't want two of the same ends.

Step 5: Install rails.

Step 6: Attach top rail using 2-1/2" screws.

Step 7: Corner out plywood and install.

Step 8: Attach pegboard

Step 9: Organize!

The larger size gave up plenty of room for our small and large tools.

The actual assembly of the workbench took us about 1-1/2 hours.  Not bad at all!

Enjoy!

Backyard Composting

I was on pinterest and a composting pin caught my eye. The pin redirected me to Someday I'll Learn. They talked about composting and how easy it was. I started to think about how much trash we throw out for just two people. We do the recycling thing but I thought we could do better.

I googled "composting chemung county" and was immediately directed to Chemung County's Composting Program. Crazy! Who knew? I read through everything that they said about composting and their program. I couldn't believe everything that you can compost. Here's the list of items that can and can't be composted.  It looked pretty easy but it was going to take additional effort on our part. We could do it. I had looked at the bins we could get from Chemung county and fortunately, they were only $50. The actually retail for $199. I figure that's a pretty good deal. Next step, convince Tony. This was actually much easier than I thought. I sent him a "Wanna try?" e-mail and he said sure. Easy peasy.

A couple weeks ago, Tony set up the composter near the house but hidden from a main line of site. I had to get a countertop compost container.  I wanted something that we could throw food scraps for a week then take them out to the compost bin.  At first, I was planning on getting the OXO Good Grips Compost Bin mainly because Shelley works for OXO.  Unfortunately, I didn't like how it didn't snap shut.  I was worried about bugs and the smell.  I ultimately settled on the Oggi Stainless Steel Composter.  I liked the way the top nestled into the base and the filter.

Here's what I do when I take our kitchen scraps and add them to the outdoor composter.

Step 1: Add some "brown" from the above list.  For me, It's leaves.

Step 2: Add the "green" from the above list.  This is our kitchen scraps.

Step 3: Cover the "green" with "brown."

So far, there is no smell, no bugs, nothing.  It's really nice.

Do you compost?

Traveling Abroad: Hair Styling Tools

My husband mentioned that my blog is mainly Handy Homeowner and is missing the Heels.  He thought I should talk more about my job (which I really can't) or things related to it since that's when I wear my heels (most of the time).  This got me thinking about what have I learned that would be helpful to share.

When I first started travelling for work, I had to figure out how I was going to travel with my straightener and curling iron.  There were a couple of hurdles to jump over to get them to work.  

The plug
There are different plugs throughout the world.  The standard plug that we are use to using in the US can't just be plugged into outlets in other parts of the world.  In Japan, the plugs are type A.  If you have a three prong plug or simply a polarized plug, you can't plug it in to an outlet in Japan.  Here's a chart that shows the different types of plugs.



The frequency
Here in the US, our outlets are 110/120 Volts at 60 Hz.  This is not the same throughout the world.  In Asia, they use 220 Volts at 50 Hz.  If you connect something designed for 110/120V 60Hz into a 220V 50 Hz outlet, the current traveling through the item will be higher than it is in the US.  This will cause the insulation around the electrical wiring to deteriorate faster and possibly burn-out.

Here's a good website the sums up the type of plugs and the frequencies used in the different countries around the world.

So, how do you overcome these hurdles?  There are two options.

Solution 1
Purchase a plug adapter and transformer all in one.  This will take the higher voltage and step it down to be used with 110/120V 60Hz electronics.  


Here are a few that can be found on Amazon:
Conair
Walkabout Travel Gear
Enovize

The problem with the all in ones is that you need one for each electronic item that you want to use simultaneously.  They are also rather bulky so you have to plan accordingly when packing.

Solution 2
Purchase a plug adapter and use dual voltage electronics.  Dual voltage electronics are fairly common.  Here's a list of some of the dual voltage products that you may have in your home:

• laptop/kindle charger
• cell phone charger
• straightener
• curling iron

When using just a plug adapter, you must make sure you only use dual voltage items or there is a strong chance you will cause it to burn-out.

I chose this solution and purchased two Sima SIP-3 Ultimate International Travel Adapter Plug Set.  They are rather light and pretty compact.  I have noticed that my dual voltage items do run slightly warmer to the touch compared to when they are plugged in in the US.

Here's what my polarized plug straightener looks like plugged into the Sima adapter.

How do you know if you have a dual voltage product?

Easy.  It's printed right on the product.  Here are photos showing where to look and what to look for.

Hair Dryer & Curling Iron - Both have the label on the back of the handle.  The hair dryer is not dual voltage.  Fortunately, most hotels have hair dryers.  The curling iron is dual voltage.

Hair Straighteners - I have three different ones.  Only two of them are dual voltage.  The Hot Tools straightener (upper right) is not dual voltage.  Unfortunately, I couldn't get a shot of the label based on where it is located.  The other two are dual and can both be used internationally.

Other Chargers - Below are images of my laptop, kindle, and two cell phone chargers.  They are all dual voltage.

Happy Travels!!

The Pit - Clean-up

The people who owned the house before us had a swing set that sat in a mulch pit with a mini sandbox. We don't have a swing-set or kids. There's no immediate plan for needing a mulch pit. Last year, we wanted to rip it up but we didn't know what to do with the stuff. Tony and I both grew up with woods behind our homes. This was great for dumping leaves, grass, etc. Here, we don't have that luxury. So over the past year, we just left it. 

The Pit

When Tony and his dad re-did the pool deck, the old plywood went to the pit. When I trimmed the maple trees in front of our house, the branches went to the pit. When my dad and I made the new door to the garage, the old one when to the pit. This spring, I raked leaves while Tony trimmed the bushes in the back of the house. All of the leaves and bush trimmings, went to the pit. Now we had this huge pile of stuff that we needed to get rid of. 

The Full Pit

I called our garbage people and we could get a roll-off for a minimum of $112. This would be best case scenario if we did it all in one day and had 1/2 ton of debris. Anything more and the price would climb. I thought we could do better than that so I went to craigslist. I posted the ad and one day later plus $60, the big stuff was gone. Two guys came, in the pouring rain, and took the big stuff away. One guy finally came back this past weekend and took away the remaining stuff. 

Cleared Pit

We need to finish stirring up the soil and plant some new grass.  Hopefully in a month or so, the pit will be a distant memory.

Pin·cesses

We've all heard about pinstrosities (http://pinstrosity.blogspot.com/). A pin·stros·i·ty is 1. a pin of great and often frightening size, force, or complexity or 2. A real life result of a pin. 
What happens if a pin is a success? I call this a pin·cess. 

Here are the original pins along with their successful completions. 

Charger Clip  
In the original pin, they used a binder clip.  I used a clear Command clip so it is less noticeable.

Dish Soap Dispenser 
I love how this one turned out.

Styling Tool Holder 
A metal file folder plus a few command clips keep my hair tools contained.  Tony greatly appreciates this pin·cesses.

Ticket Shadow Box 
Mine is not as elaborate as the original pin but I still love it and it looks great on a shelf in our living room.  It has tickets from all of our Penn State games along with old movie tickets and even my ticket to Taipei 101.

Here are some pins that I have tried and they really work! I don't have my own pictures of their pin·cesses. 

Homemade Goo Gone

Lint and a toilet paper roll as a fire starter 

Sheets in a linen closet 
Folding all sheets and placing them inside one of the pillow cases keeps everything nice and tidy in the linen closet.

Wood spoon to stop water from boiling over 

What pins have you tried that work??

Home Fire Protection

Earlier this year, I had a safety meeting at work. There were a couple of things that really stuck with me so I decided that I needed to assess our homes fire safety systems. Here's the things I looked at: 

• smoke alarms 
• fire extinguishers 
• clothes dryer
• battery storage 
• exit plan 
• fire department 

Starting at the top... 

Smoke alarms
We had one alarm in the hallway going up to the bedrooms. I had never really looked at it so I assumed it was okay. The battery was dead. Uh oh! When did the battery die? Did it happen while we were on our honeymoon? Could we have been living in our house of a year without this smoke alarm working? It's possible. I never checked it. 

I didn't know how old the alarm was so we decided just to replace it. We replaced the one upstairs, installed one outside the kitchen, and one downstairs outside of the laundry room.

When I replaced it, there was segments of the NFPA 72 code in the pamphlet. It goes over what is required by law and what is recommended.  For example, in new construction, smoke alarms are required in every bedroom.  In our home, we are only required to have one per floor with the recommendation to have one in every room. 

NFPA is the National Fire Protection Association. According to their website (https://www.nfpa.org/), "The mission of the international nonprofit NFPA, established in 1896, is to reduce the worldwide burden of fire and other hazards on the quality of life by providing and advocating consensus codes and standards, research, training, and education. The world's leading advocate of fire prevention and an authoritative source on public safety, NFPA develops, publishes, and disseminates more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks."

Fire Extinguishers
This was easy.  We knew we were okay here.  We've got one in the kitchen and one in the laundry room.  Checking them was even part of my Monthly To Do List.

Clothes Dryer
This is something that I had heard about being a leading cause of house fires.  I actually knew an employee at Penn State who had their house burn down due to a dryer fire.  The dryer is very easy for people to do is to turn on the dryer before you leave.  This is not recommended!  Here's a list of recommendations from NFPA: Dryer Safety Tips.  Here's how I clean my lint trap: How To: Clean A "Clean" Lint Trap.  

Battery Storage
This was something that I hadn't given any thought to.  Just throw them in a box and you are good to go.  I was wrong.  The most common battery short is a 9V battery because the terminals are so close.  NFPA has a safety sheet just about 9V Battery Safety.  You can see a video about how a 9V battery started a house fire here.

Our batteries were just thrown in a box.  I bought a couple of battery storage cases and re-organized it.  Here's a look at our battery storage.

Exit Plan
Because we live in a tri-level, we've got multiple points of exit from the first two floors without a major drop.  On the first floor, we've got the front door, windows in the living room, windows in our office, and windows in the bathroom.  On the second floor, we've got the door to the garage, the windows out the front (with a slight drop), and the back door to the porch.  Those two are easy.  The third floor however, we've only got the windows or down the steps to the second floor.  If there's ever a fire in the kitchen, our only option is the windows.  Jumping out of a two story window was going to hurt.  We could exit to the roof over the front porch but there was still going to be a significant drop.  Our solution was an escape ladder.  Problem solved.

Here's some helpful information from NFPA about Escape Planning.

Fire Department
I didn't know the number of our local fire department.  Of course, 911 works but I wanted the actual number.  I used this website to find our local fire department number.  It appears as though they have every fire department in the county on that website.


Disclaimer: I am not a fire protection expert. I have just communicated what I have learned in my quest to update our home fire protection. If you have concerns, I would contact your local fire department.

How To: Easy Wall Repair

So when we bought our house, there were certain things that had not been touched in ages! One of these things was the thermostat. It was ugly and I hated it but it work so for the first year, we didn't do anything. Then the buttons started to only work when they felt like it. This was incredibly frustrating! We decided to buy a new thermostat and just swap them out. We thought it was going to be about $30 and 10-15 minutes to swap it out. We were wrong... 

Apparently, they made the hole in the wall as tall as the old thermostat and the newer one was much more compact. Uh oh... We now had a few gaps above and below. The nice thing was that the mounting holes lined up! Minor success with an overall project failure.  The only thing to do was to repair the wall.  The problem was that it was going to be a little bit more than just a bit of putty.  After discussing the issue with my dad, I had a plan of attack.

Here's that I did.

Step 1: Find scrap wood or shims to create a back to build the putty on.  Fortunately, I had left over strips from our door project: How To: Build A Custom Door.  The strips were ripped thin enough that all I had to do was to cut it to length.

Step 2: Cut the wood to length.  Drill a hole to feel the wires through.  Make sure it is large enough to feed the wires through easily.  

Step 3:  Feed a rope through the hole and tie it where you can remove it.  I used a ribbon since it was lying around.  Feed the wires through the hole.  

Step 4:  Feed the block through the wall opening.

Step 5:  Support the wood to have it mostly centered in the hole.  I used a paint stirrer to keep it up.

Step 5:  Drill a couple pilot holes then screw the wood to the wall.

Step 6: Putty the hole to fit.  I was impatient (shocking, I know!) so I used a hair dryer to speed up the process.

Step 7: Sand and paint.

Step 8: Install new thermostat.

Project complete!!  I'm very happy with how it turned out!

My sister was a huge help during this process.  She took the lovely pictures and was happy to "hold this."  Thanks Amy!!